You are here
Adhesive mixture for heat insulation systems universal ПСТ-014
Universal adhesive mixture for bonding insulation plates and the formation of a reinforcing layer for facade insulation.
Scope: The glue “ПСТ – 014” - finished dry adhesive mixture for using in bonded insulation on the basics, resistant to deformation (concrete, cement, cement-lime, brick, etc.) for:
- Mounting panels polystyrene and mineral wool for facades insulation of buildings;
- Protective devices reinforced layer (puttying) for insulation boards with facades insulation of buildings;
- Fixing the tiles with low water absorption (less than 1%), as well as slabs and tiles of large size (45*45, 60*60 or more): ceramic granite (tiles "ГРЭС "), ceramic and glass ceramic tiles, slabs and tiles of natural and artificial stone and similar materials, as well as fixing the tiles by the "tile over tile."
Adhesive mixture can be used as a self-reliant mortar, and as an additive for mortar to improve its performance.
If it is necessary to increase the hydrophobic properties and adhesion to the substrate adhesive - prepare mixture using contact emulsion ПЛ-125 and stretch ПЛ-127.
Dry adhesive mixture " Полипласт ПСТ – 014" to mix with pure cool water, according to the proportions specified in the technical data until receiving smooth with no lumps. Mixing can be carried out manually or with a low speed drill with a paddle or stirrer. Prevent foaming while stirring. Cure the solution stand for 5 minutes, determine the movement and bring it to the Technical Data with the addition of the dry mixture and mixing the mortar mixture, as described above. Stir again the mortar mixture before using. Mortar mixture used for 90 minutes. Use clean containers and tools for preparing the mixture.
Storage life: 12 months from date of manufacture in original packaging at a relative humidity of 60% and a temperature of +1 ° C to +30 ° C
Specifications are showed for standard tests on the temperature +20 +2° C and relative humidity 65 +5%.
ТУ У В.2.7-26.6-30466728-001-2001. Finally sanatorium-epidemic. examination № 5.10 / 5090 of 12.02.2002
Manufacturer: LLC "Polyplast"
- Excellent adhesion to a wide range of both hydrophilic and hydrophobic materials and surfaces
- Water-resistant, cold-resistant, vapor-permeable, non-combustible
- High capacity with fixing bracket
- Flexible, easy to plot in the terms of reinforce protective device on the insulation slabs
The main binder - cement.
Mineral fillers, special modifiers
Packaging: 25 kg / bag
Consumption: 4-5 kg / m2
Price: 64.80 uah